Preview · Plastic bottle under UV light
Indicative simulation. Ask for a test on your material to validate adhesion and contrast.
TIJ ink · security
Security TIJ inks
Invisible security TIJ inks for special applications, fluorescent red or blue under UV light.
InvisibleUV fluorescentHigh optical densityFriction resistantLow maintenance
Colour: Invisible · red UV reaction
View on
Packaging colour:
Available variants
Invisible solvent TIJ ink with red UV reactionInvisible security dye ink, red under UV light, for porous, semi-porous and non-porous surfaces. High adhesion on most coatings, varnishes, plastic and acrylic surfaces, high fluorescence contrast and high optical density, resistant to friction, water and light.
Invisible water-based TIJ ink with blue UV reactionInvisible security dye ink, blue under UV light, for porous and semi-porous surfaces. Good adhesion on a wide variety of coatings and substrates and high optical density, resistant to friction, water and light.
Where it works
Plastic and acrylicNon-porous surfaces
Coatings and varnishesSolvent version (red UV)
Porous substratesCardboard and paper
Why this ink
Invisible markingOnly visible under UV light, in red or blue.
DurableResistant to friction, water and light, with high optical density.
Low maintenanceFormulated to minimise drying in the printhead.
Compatible printers
K150NHSHigh-speed TIJ printer, 1–50.8 mm at up to 240 m/min, GS1 DataMatrix and network management.
K125NFIndustrial TIJ 2.5 printer, 1–25.4 mm, 120 m/min at 300 dpi, 5-inch touchscreen and steel housing.
K150NEIndustrial TIJ 2.5 printer, 25.4 mm per head or 50.8 mm with two, 120 m/min at 300 dpi.
K160NEMulti-head TIJ printer: 1 to 6 printheads, separate or joined up to 76.2 mm, 7-inch touchscreen.Frequently asked questions
What colour does it show under UV light?
The solvent-based version reacts red under UV light; the water-based version reacts blue.
Which surfaces can it mark?
The red solvent version marks porous, semi-porous and non-porous surfaces (coatings, varnishes, plastic, acrylic); the blue water-based version, porous and semi-porous surfaces.
Does it dry in the printhead?
It is formulated to minimise drying in the printhead and requires low maintenance. The maximum idle time depends on the cartridge and conditions.
Which ink do you need?
Tell us your printer and the surface you mark. We will recommend the right ink and send you a quote.
1
Tell us your printer, the surface and the colour you need.
2
Our technical team recommends the right ink.
3
You receive a quote with the recommended ink for your line.
Request sent
We have sent you a confirmation email. Our technical team will review your printer and surface and get back to you with the recommended ink.