K160NE

Termal Inkjet Tecnology 2.5

tidirefi-k160ne

10 REASONS

  • No need to change filters
  • Low acquisition cost
  • Size small
  • Easy to use and create messages
  • No maintenance or technicians required
  • No wear parts
  • High resolution marking
  • Friendly inks without mek
  • Printing on multiple substrates
  • High operational profitability

HIGH-SPEED PRINTING

Up to 120 m/min. in 300 DPI resolution

_

EASY TO USE

7″ touch screen with intuitive WYSIWYG interface for easy operation and programming

K160 Printer Set

1/2 inch – 12,7 mm or 3 Inch – 76,2 mm printing according to the modular printer configuration with one controller and one, two, three, four, five or six printheads.
Independent product detection by printhead or by printhead block includes:
7 inch touch screen controller with one, two, three, four, five or six printheads separated or joined by umbilical  by 1.8 Meter umbilical
Mounting brackets for controller and printheads
30 V. Power supply
Cylindrical direct reflection photocell with connector and 2 M. cable .Depending on the configuration of the printer, up to 6 photocells can be installed, one per printhead
LAN + Full connectivity with multiple systems
Packaging: 52 x 28 x 23 cm Weight: 5.500 Kg Plastic case
Define power cable and cable for battery charger:
American Type A or European Type E

QUICK AND EASY HIGH RESOLUTION PRINTING

HEAD PRINTING

D1 Configuration x 2 individual printheads
Height per printhead 1/2 Inch – 12.7 mm
D1 Configuration x 3 individual printheads
Height per printhead 1/2 Inch – 12.7 mm
D1 Configuration x 4 individual printheads
Height per printhead 1/2 Inch – 12.7 mm
D1 Configuration x 5 individual printheads
Height per printhead 1/2 Inch – 12.7 mm
D1 Configuration x 6 individual printheads
Height per printhead 1/2 Inch – 12.7 mm
D2U Configuration  1 double joined printhead with an overall height of 1 inch – 25.4mm
D3U Configuration  1 triple joined printhead with an overall height of 1.5 inch – 38.10mm
D4U Configuration 1 quadruple bonded printhead with an overall height of 2 inches –  50.8mm
D5U Configuration 1 quintuple bonded printhead with an overall height of 2.5 inches – 63.5mm
D6U Configuration 1 sextuple bonded printhead with an overall height of 3 inches – 76.2mm